|
Mixing
- Batch Mixer (250 cc electrically heated and forced air cooled) and granulator
- Single screw extruder (33:1 L/D, ¾”, SPC capability, torque rheometer) with strand pelletizer
- 25 mm vented co-rotating twin screw with two feed ports (21 to 40:1 L/D, strand pelletizer)
Molding
- 30 Ton hydraulic injection press (SPEC capable, ASTM, ISO, test bars, 3"x3" GM texture Plaques, machined-in notched Izod bars.)
- Compression molding press (6”x 6”, 10”x10”) maximum 350 C
Processing
- Profile extrusion (R &D, Garvey, 1” tape, 1/8” rod, 3/8” rod, wire coating, 4” wide sheet extrusion)
- 4" lay flat blown film (1 mil to 10 mil film thickness)
- Batch scale thermoforming and proprietary thermoforming analyzer
Test Specimens
- Die cut from compression molded sheet
- Molded ASTM (tensile, flex, Izod impact, tensile impact, HDT, water transmission, flammability
- Molded ISO
Testing Equipments
- Density meter
- Capillary Rheometer
- Melt Flow rate and Melt flow index
- Tensile Testing machine (with environment chamber, max speed 20 ipm)
- Flexural Properties (with environmental chamber, 1/8” and ¼”)
- HDT and vicat (Five station CSI, up to 200 C)
- Izod Impact (-40 C, 23 C)
- Gardner/Dart Drop Impact (-40 to 23 C)
- ASH test (Muffle furnace)
- Moisture analyzer
- Taber Abrasion tester
- Taber triple beam scratch/mar tester (with capability to determine scratch depth)
- Hoffman Scratch tester
- Film thickness measurement
- Coating thickness measurement
- Pipe mandrel bending test
- Compression set
- Hardness (Rockwell, Barcol, Shore A, Shore D with constant load stand)
- FTIR (with ATR, solid pellets, powders, liquids, films)
- TGA
- DSC (with low temperature capability, multiple samples)
- Mechanical heating ovens and vacuum drying ovens
- Limited Oxygen index tester (LOI)
- Permeability (He, O2, H2O) available upon request
- Dynamic Mechanical Analyzer, Steady State Shear viscosity of liquids and solids
- SEM, XRD, Dart impact of films
|
  
|
|
Innovative solutions, Rapid turn around, Competitive Prices
6005 Commerce Drive, Suite #300, Irving, TX 75063 (972)-870-9988 / (972)-580-1377 (F),
E-mail: TTG@transmit-technology.com
|
|
|
